Panerai Luminor Deployant Clasp
This is there are two achievements – polished or brush. Domestic part of the clasp is brushed stainless steel in two modes – this is only the outside world ‘clear’ part, this is a different button.
Deployant recently changed, because it is introduced. The old version of the photos are as follows:
Pin side, namely the possession of a short part of strap is threaded into the buckle and belt, which must first unscrewed.
The first is a fixed needle through the aperture of the belt buckle as long as the twisting.
Aperture open and then buckle, as well as screw thread pin to buckle.
The current model, the entire pin can be mobile and being held in a very small screw.
(Screw is the point in the left side of the picture!)
Aperture placed in the belt buckle down the pin and screw through the belt is tightened to prevent foot slipped.
There are two important differences between bands deployant buckle. A band will not fit.
The first difference – hole
As you can see above, the reduction is less than the Tang Dynasty bars deployant.
The second difference – the thickness of
These are the ‘same’ of OEM black calf leather belt, but the thick layer of model (I) would be inconsistent with deployant, need a very thin ‘tongue’ through a metal buckle. Low with more than 2/3rds of the belt is very thin, for this reason.
Rubber belt, the same rules apply – however, indicate whether a third of a rubber band deployant buckle.
